Bouncing Baby Olive

I made this card for a baby shower to hold a gift card for Mamma and Baby.  My inspiration was the invitation and I nearly squee'd when Mamma noticed!  The invites were a pocket card with large rose outlines in olive greens and pinks for the colors and some polka dot accents with some pink pearls.  I played with those elements and came up with this.

I really wanted to use my Kangaroo with Joey stamp.  I love this stamp for Baby showers. I used my embossing folder for polka dots.

It was my first attempt at a pocket card.  I tried to take shortcuts and that didn't work so I really looked at the original and worked out where I needed to cut and put the adhesive.  If you look closely at the insert, you can see there is a pocket for the gift card.

Ingredients
Card size - 4.25in x 5.5in
Cardstock - Neenah Classic Crest Solar White Smooth.
Stamps - High Hopes Stamps
Ink - Memento
Color - Copics
Accessories - Embossing folder - polka dots, Ribbon, Pearls.

Time to Roar!

 

Another card for my university kid!  Gotta keep the chin up and remind them that all the hard work (and play) is worth it!  I made this card for a Gina K challenge  and TBH it was so long ago I can't remember the challenge now.  I sent this to him last week with a box of goodies.

 

Ingredients

Card size - 4.25in x 5.5 in

Cardstock - Neenah Classic Crest Solar White Smooth,

Stamps - High Hopes Stamps, Cornish Heritage Farms, Stampendous

Ink - Memento, versamark

Color - Copics

Accessories - Black cord, embossing powder, Spellbinders die, Airbrushing.



 

RIT Tigers block

So for graduation I made my cousin's daughter a Bellarmine glass block... well you should have seen the look on the face of my eldest. Absolute devastation at not having got one.  So I had to get to thinking, because to be honest he is picky.  He doesn't admit it but he is.  I found a few of his school's logos* and asked his preference (which wasn't mine LOL) and set to work.  I'm going to go ahead and describe my process again as I changed a few things from the last time.
I measured my block (again) to make certain I had the right measurements for it.  I then printed the image on plain paper and again sized this up to my block.  Then I cut off some tissue paper and  adhered it to the printed plain paper with masking tape about 1/2 inch down from the top to feed it through my printer.  And left it to dry.  I didn't adjust my printer settings because I wanted the black and the orange to be as intense as possible. 

This time with the block I painted on the Modge podge and then stippled it.  I was a bit wary of attempting that again because it didn't work when I did the Bellarmine block but I didn't want the line effect with this block. 

Cutting the tissue paper down to size and rounding the corners then I patiently and carefully adhered it to the block.  If it tears it is possible to push it backtogether, however it depends on how bad.  If it is too bad just wipe the block clean and go back and print another tissue paper, cut it down, stipple the glue on the block to start again.

After completing the RIT Tiger side, I finished off the opposite side with some clipart gears and my student's name the same way as I did the Tiger side.

After both sides were dry it, they were sprayed with Krylon, Matte sealant to seal the printed colors and it also gives this frosted appearance to the block.

Next step, to glue on the black, stiched ribbon with hot glue.  Wow, what a mess that was.  Because the  glass was cold and I only had two hands it would get lumpy.  I think if I do another one I will just use a wet glue.  Then I had to work out how to use the measuring tape ribbon.  Ideally it would have worked in the middle of the block but there is a ridge.  I decided it had to go on one side of the ridge, but didn't have enough for it to go on both sides.  That is when I decided to use similar plain twill ribbon and stamp my own.  I like how it turned out.  The last touch was the satin ribbon on the seam of the block. 

Lastly, I cut the plastic bung for the bottom of the block from the edge to the small hole in the middle and fed the cord of the light through the hole.  I secured the light in an upright position with a  3D Zot glue dot.  The bung for this block was tight so I didn't adhere it closed.




Ingredients
Surface - Krafty Blok Large
Paper/Cardstock -Printed Tissue Paper
Adhesive - Modge Podge, 3D Zots, Glue gun
Stamps - See D's
Ink - Memento Tuxedo Black
Miscellaneous - Ribbon, Krylon Matte Sealer Spray, Night light.

*used under Fair Use http://en.wikipedia.org/wiki/Fair_use

The writing is on the Road

 

I gave this card to my son who is a Mechanical Engineering major at RIT.  I wanted to create the subtle background impression so after stamping and coloring the frame of the plate I embossed it with my gears folder.  I stamped the date and cut it out and adhered it. 

 

The real trick to this card was keeping it a secret from my son over the summer.  I think he was truly touched when I left him (after helping him move in) with a card from home as he embarked on his new journey or it could have been the money inside! LOL!

 

Ingredients

Card size - 4.25 in x 5.5 in

Cardstock - Neenah Solar White Classic Crest Smooth

Paper - The Paper Studio

Stamps - Autumn Leaves "License Plate"

Accessories - Cuttlebug Gears embossing folder

Pink Lady Diva Birthday!

Again I am catching up posts with my cardmaking! Maybe one day I will get it all done at the same time - yeah, keeping the dream alive!

 

I created this card for my neice's birthday and for a GinaK challenge that was all about Pink.  Lots of glitter and shoes and you really can't go wrong for a girlie birthday!  I double stamped the shoe one on the diecut and the other on a spare bit of cardstock to cut out and pop up to create a pair of shoes. 

 

Ingredients-

Card size - 8.5 in x 5.5 in

Cardstock - Neenah Solar White Classic Crest Smooth, The Paper Studio, Recollections

Stamps - I Brake for Stamps

Ink - Memento

Color - Copics

Accessories - glitter, ATG tape, Martha Stewart glue, rhinestones, Spellbinders dies



Vroom for Father's Day

Ages ago I bought loads of car, motor related stamps from Clear Dollar Stamps because I knew I would use them; the thing is I kept using other stamps for those people I knew I would use all those car stamps.  Anyway I decided I needed to use at least a car stamp, the time was long overdue.




Ingredients
Card Size 5.25 in x 5.25 in
Card Stock - Neenah Classic Crest, Archiver's Open Stock
Stamps - Clear Dollar Stamps: Corvette 1968, Got Tractor, Petrol Can; Kitchen Sink Stamps Ready 4 Any Holiday
Ink - Memento Tuxedo Black, Versamark
Color - Copics
Miscellaneous - Black Detail Embossing Powder, Brads

25th Anniversary Heart Shadowbox

I saw this on Etsy and it inspired me to make this frame for my BIL & SIL for their 25th Wedding Anniversary.  I really wanted either a Silver, Black or White frame.  However, I think this works.  The frame is a warm, deep brown. 

I made the hearts with a gorgeous dark red velvet paper and popped them up on dimensionals rather than trying to fold them as in the inspiration piece.

I'm hoping to make another (need to find another frame) for my own house!

Ingredients
Medium - Shadow box frame
Card Stock - Watercolor Cardstock, SEI Velvet paper
Miscellaneous - Printer, Martha Stewart Heart Punch